Bluetooth VAS 5054A V19 Universal Diagnostic Interface New Arrival

VAS is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers, mainly do AUDI VW Seat. This kind of the VW Audi diagnostic tool or German car diagnostic tool is the automotive workshop specify diagnostic tool.

VAS 5054A diagnostic system included VAS PC Software and VAS Tester interface

VAS 5054A Software Version: V15/V16/V17/V18/V19

VAS Tester: The diagnostic system can easily access the VAS 5054A via Wireless Bluetooth or USB.

Testable Systems:
1. ECS (engine control system)
2. Transmission control system
3. Brake Control System
4. Diesel pump control system
5. Safety bag
6. Anti-skid Control



What are new on VAS 5054A V19, the newest version?
Bluetooth Version, different Bluetooth security levels are supported.
Multi-language available:

English/Germany/Russia/Spanish/Czech/France/Dutch
Add new car models Bentley and Lamborghini
No cables are needed for vehicle diagnose, the integrated Bluetooth interface connects the vehicle to a notebook, desktop PC or test system.



For more information as following about VAS 5054A V19, please feel free to visitXcardiag.com.

Vehicle bus systems are supported

Computer Windows System Requirements

Access via Bluetooth

Access via USB

Software display

Installation on BMW OPS/GT1/OPPS DIS V57 SSS V41 Fit IBM T30

OPS/OPPS has been designed for encoding, individual listing and programming (CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DIS Plus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.

There are three BMW Programming Tools:

BMW OPS DIS V57 SSS V41 Fit IBM T30



BMW OPPS DIS V57 SSS V41 Fit IBM T30

BMW GT1 DIS V57 SSS V41 Fit IBM T30

What is the difference between GT1, OPS and OPPS?

These three kinds of BMW diagnostic tools are sharing the same functions.

GT1 is good for cars before 2005, while OPPS and OPS are good for cars from 2005 onwards. Compared to OPS, the OPPS owned the better quality.

I found the installation instruction from BMW OPPS DIS V57 SSS V39 webpage atXcardiag.com. I think this free download files can both work on BMW GT1 DIS V57 SSS V41, BMW OPS DIS V57 SSS V41, BMW OPPS DIS V57 SSS V41.

How to enter DIS V57

1. Put T30 hard disk into IBM T30 laptop.

2. Start the computer and wait for 2 seconds. (Be patient and wait)

3. Untill the screen comes up a picture with “DIS”. It means it finishes the start of software and begins to diagnose car.

How to Start SSS V39 coding software

1. Star computer and open software

2. When the second screen appears, press “F2” button on the laptop

3. Computer will go to SSSV39, and you will see SSS V39 Version information and SSS39 language options.

For the diagram guidance, please visit:

http://www.xcardiag.com/upload/service/bmw-opps-t30-version-v57-sss39-installation-manual[1].pdf

Which MB Star C3 software can work on my computer?

Diagnostic tools can perform an analysis of almost all a car’s major features including the fuel pump, tank venting, and charge air fan. The Star C3 Mercedes Benz Diagnostic Tool is a professional specification diagnostic tool designed to operate in conjunction with a personal computer. It is equipped with the Movement Management System Starutilities, the Workshops Information System, and the Automatically Diagnose System in order to provide a full analysis of the working condition of Mercedes Benz automobiles. It has been designed to work with all Mercedes Benz models, and comes with a Ultiplexor D4 and OBD II cable.

And the diagnosis tools are available for Mercedes Benz cars from companies such asMB Star and from Magus, and they are generally designed to be compatible with the latest computer software.

Here are two version of MB Star C3, which can work on different kind of computer or laptop.

Mercedes Benz Star C3 Das V2011.07

It fit most of the laptop and computer. And Xcardiag.com supplies IDE HDD, SATA HDD, and T30 HDD. It can be used on other laptop with SATA format, not only IBM T30 (IDE format).



MB STAR C3 Software 2012.05 Version Fit IBM T30 Laptop

This software can be only used on IBM T30 laptop. And need works together with MB STAR C3 or MB STAR C4 too.

For further understanding of MB Star C3 diagnostic software, such as features and any other requirements of installation, Xcardiag will give you the detail introductions with pictures.

How to use Va can scanner to read the fault codes

Your car’s check engine light is on that you should notice it. It tells you the car have some problems. But It’s difficult to figure out what’s the problem exactly if you don’t have any Vag diagnostic tools. Because the check engine light could indicate thousands of difference problems with your car. Maybe you will take your car to a repair which will cost you a lot of money and time. And sometimes your car just have small trouble which you can fix it by yourself. So knowing your car problems is very important. The only way to do this is understand the obd codes.





OBD is short for on-board diagnostics. Since 1996, Every car has this system. This system monitors a car’s performance and will alert the driver when it detects any problems. When plug into a code reader such as VA CAN Scanner,the car will tell you what’s wrong. There are over one thousand difference codes which stand for difference problems. But you needn’t worry about it. Va can scanner diagnostic tool stores a database of more than 14000 fault-codes and measuring-block texts.

When you own a Va can scanner, it will help you a lot. when you do troubleshooting, connect the Va can scanner to your car, If you use it first, wait for minutes to initialize. The scanner will check your car’s computer to find out what protocol to use and then connect. Once Va can scanner has connected, it will read the codes given by the computer and display it. And with the help with code explaination from some website, you can find out the problems with your car. And Va can scanner diagnostic tool also can erase the fault codes. It supports all VW, Audi, Seat and Skoda models up to the current model year.

BMW CIC Emulator make jack more closed to his son

Jack like to travel by his new BMW535i.but the BMW cic functions are inoperative.The navigation can’t work which limit his travel .What’s worse , the TV-DVD is inoperative ,neither.The litter jack often refuse a long travel with jack.because he feel so boring ,he can’t watch the dvd when the car is driving.It really make jack big nerve-racking.He loves his son and want to take little jack to close the nature and open his mind .He also enjoy traveling with family.



Recently,I often see jack and little jack going travel with 535i happily.what happened to make a big change?When I get to know,Jack tell me that he bought the BMW CIC Emulator which make him can drive with navigation and little jack can watch the dvd when he is driving .

BMW CIC emulator will enable CIC navigation function on used (second-hand) CIC units and will make it TV free (TV-DVD function ON while drivind). BMW CIC also add 2 additional 10-47uf electorlyt capasitors to so solve that cicemu sometimes restart itself which because ar power supply noices effect (HID lamps, bad akku etc.)

How to use KWP2000 Plus F32 the ECU REMAP Flasher

It easy to repair ECUs with KWP 2000 Plus ECU REMAP Flasher Tuning Tool, whatever the software problems or corruption. But there are some moves should be noticed, when using the KWP2000+ to read and write data.



In the most situations, it will be fine, if you were following the guidance carefully and had attention on the KWP2000 Plus operation instruction. Here is the KWP2000+ ECU chip tuning tool technical service what Xcardiag.com offers.

http://www.xcardiag.com/service/kwp2000-plus-ecu-remap-flasher-76.html



How do you use the KWP2000 PLUS?
1. You need a computer. Installing KWP2000 Plus software.
2. Connect USB cable to your PC;
3. Connect to your car via standard 16-pin OBD2 connector;
4. Supports high speed ECU flashing
5. Led indications for USB-power Car-power/rx/tx
6. Support KWP2000+ software and other KWP/ ISO software



How to Read and Write data?
1. Click read button to read out the original data
2. Click write button and select the file you want to write
3. Save the file to you HD, edit or forward it -Follow the instructions on screen
4. Switch off ignition and wait 10 seconds



Using this KWP2000 plus interface you can change maps on 44 types of ECUs. You can read original maps, edit, modify (with other software, not included) and load it again into ECU of Your car. This interface can read or write the all content of the flash memory via diagnostic socket (OBD2) of the car or directly attached to the ECU plug. Including Pocet PC Software and Dashboard Correction Software

Only Multi-functional VAG K+CAN scanner can meet picky Tonny demand

Tonny is a vw fans.He owns VW Bora,Skoda Fabia and Audi A6.Recently, he wants to buy a SUV.But his financial is a little tight . he has to sell Bora.In order to sell a good price ,he would like to correct the odometer. he need a odometer correction tool.But he doesn’t want a tool which just can modify odometer.His Fabia only has a one key ,His sister Anna will go to college soon,Tonny just want to share Febia with Anna. His Fabia has no spare key.So he need a key programmer.Tonny also wants a diagnostic tool which can read Security Access Code ,reset the airbag and do the daily maintence.All in all ,Tonny need a Comprehensive tool.By the way ,Tonny is a picky people.He seeks the tool from car shop and internet but the stuffs can’t satisfied Tonny.

Tonny doesn’t find the perfect one until one of his friends recommend VAG K+CAN scanner to him .What’s VAG K+CAN ?It should be very Multi-functional and meet Tonny demand so that picky Tonny chooses it at last.



Super VAG K+CAN Support Comprehensive model, support the great majority of VW, Audi, and Skoda model. Support Comprehensive Anti-theft System, such as IMMO1, IMMO2, IMMO3, WFS, etc. Support K-Lines, Can BUS, and UDS protocols.which can be used to odometer correction, read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat, VW ,VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia cars.And now Super VAG sofeware has updated to 2.0 newly.



What are added to the PLUS 2.0 compare with the old SuperVAG K+CAN?

1. Odometer corrections for VW Golf,Jetta,Caddy,Touaran,Eos,Tiguan,Passat platformB6, Skoda Octavia II ,Bora with MICRONAS CDC3272 or CDC3217/97 NEW
2. Odometer corrections for Audi A4 A5 q52008-2010 new
3. CAN security access code reading for VW Golf,Jetta,Caddy,Touaran,Eos,Tiguan with MICRONAS CDC3272 or CDC3217/97 NEW
4. K-Line Security Access Code Reading and Odometer Correction for Audi A4 BOSCH RBX(K) up to 2008

BMW GT1 DIS V57 SSS V39 Commonly Questions Gathering

There are 2 types BMW icom softare version in China, one is Native install version, and the other version is VMWare version, this one can work with all computers. BMW GT1with VMWare software is offered to diagnose BMW series cars before 2005. This BMW car diagnostic tool can coverage all BMW system, also can do BMW ecu programming and coding.



BMW GT1 DIS V57 SSS V39
Fit all Computers
Multilanguage

DIS: English, Chinese and Korea
SSS:English,Chinese,Japanese,Korea,Thai,Spanish,Italian,Dutch,Greece,Swedish,Indonesian,Turkish,Portuguese,French and Russian.

Questions on BMW GT1
1. BMW GT1 version specifications
2. Vehicle coverage and supported BMW vehicles list
3. How to install the VMware software
4. How to run DIS system or SSS system
5. 4 steps to turn off BMW GT1
6. Steps to turn off SSS
7. Three GT1 operation videos
8. Other free download: Ops gt1

As for the answers and other FQA, you both can find them out at Xcardiag.com.

Found one New Mb Star C3 Pro for Benz truck and car can fit all computer FAQ

Previously, if you want to use MB STAR C3, your computer should need the COM port or your computer can use this convert card. But now the newest version of MB Star C3 Pro for Benz truck and car can fit all the computers.



Q: Newest software

A: 2012.05



Q: Vehicles support:

A: 1989~up to now Car, Bus, Truck, Sprint, Smart.



Q: Compatible computers:

A: All. It has one hard disk contain DAS and WIS system.



Q: Product software includes:

A: D-A-S, W-I-S net, EPC.net, ST Finder and STAR UTILITIES.



Q: Software language:

A: Chinese, Croatian, Czech, Danish, Dutch, English, Finish, French, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish.



Q: Error during initializing Mb Star C3 Pro, no link could be established

A: During setup the Mercedes Benz star c3 and there may comes this fault “Error during initializing, no link could be established between the diagnosis gateway and the control unit”. Check whether you set the COM Port in a right way. If your star C3 bought from Xcardiag.com, please reset the COM Port.

Step-by-step solution, please visit the “Technical service” page of MB Star C3 at Xcardiag.



Q: Hard disk working with T30 and moveable hard disk? Which version is better?

A: That should be hard disk with faster than moveable hard disk



Q: Mb star c3 update:
A: Update by hard disk, need to buy new hdd for update.



Q: HDD format:

A: HDD format including external HDD and T30 HDD.



Q: Does MB Star c3 cover truck?
A: What depends, the general MB Star c3 fail to cover, users have to use the professional MB Star c3 which the truck only version. And this C3 has past truck test. It can used to do Benz trucks.



One more important thing you should notice: this Benz diagnostic tool, Mb Star C3 Pro need active after you install the software. All any other misunderstandings, please feel free to visit Xcardiag.

Tag Key Tool works on more car models than SBB or T300 Plus

SBB Key Programmer V33 is a new device used as a portable unit for programming keys in immobilizer units on vehicles. Due to its integrated hardware, SBB V33 needs no more than an OBDII cable providing with a wide range of functions.

SBB V33 support vehicle list

Godiag auto car key programmer T300+, the updated version of CI PROG 300 Key programmer has added more powerful functions, supported more car models.

Godiag auto car key programmer T300 Plus vehicle list

Surprisingly that Tag Key Tool can work on more car models than SBB or T300 Plus. For the whole support vehicle list of this universal key programmer, please feel free to visitXcardiag.com.



You can program key for vehicles, bikes or trucks of different brands. There is quite a long long list of Tag Key Tool compatible vehicles. You may better to check out the free download list I gave below. Or if you can tell the transponder type of your key chip, you can take a look over of this. Tag Key Tool is compatible with the following transponder type: Megamos 13, Megamos 48 (Megacrypt I), Megamos 8E (Megacrypt II), Temic 11, Temic 12, T5, TK5555, Philips PIT – 7930/7931/7935 (PIT), Philips HITAG2 – 7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7952, 7953, 7961.

User Instruction on Universal Dash Programming Tool Tacho Pro 2008

Tacho Pro 2008 Jan Version is well-known of its most sold programming-device for digital speedometers. If you are interesting in this universal fash orogramming tool and going to buy one home, here are the comprehensive free download files of Tacho pro odometer correction tool I collected for you.



Actually I found the following guidance at Xcardiag.com, which specialized in car diagnostic tool.

Tacho pro 2008 July repair instruction

Tacho pro 2008 July car support list

Tacho pro 2008 July user manual

Tacho pro 2008 July cable list

There are the detail step-by-step demonstration on how to trouble shooting, how to install Tacho Pro 2008 and Cautions on installation. All of these questions were figured out by Xcardiag.

The system of Tacho Pro 2008 is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation. You can serve almost any vehicle with the Tacho universal, of this you already know that if you had downloaded the free files of Tacho pro 2008 car support list.

CI PROG 300 Key programmer update to Godiag T300 Plus

Godiag T300+ key programmer, is the update version of CI PROG 300 key programmer, you will find much more designs it can do than CI-PROG 300. It fit for almost all autos that soon after 2011(EOBD2).



More powerful function

1. Read vehicle information
2. Immobiliser program, add key, match key, delete key, match ecu etc.
3. Read DTC and erase DTC.
4. Read live data.
5. Special functions.

More car models

Please download: Godiag car key programmer T300+ vehicle list
In brief:
1. SAE-J1850 PWM
2. SAE-J1850 VPW
3. KWP2000 (ISO-14230)
4. ISO-9141
5. CAN BUS
6. EOBD

More surprise

Xcardiag.com offers you free update of car key programmer T300+ in one year.

How to turn off the Check Engine light with Bluetooth ELM327

Often your car will let you know ahead of time when something is screwy by turning on the check engine light. Unfortunately there are dozens of stupid and unimportant reasons for the light to come on. But checking the code will give you something to go on whether it’s important or not. If your check engine light is on, do a quick check engine checkup to be sure it’s nothing common and meaningless.

There are mainly two steps on turn off check engine light with code scanner tool.
Connect an automotive diagnostic scanner to your car’s computer. Use the scanner to reset the “Check Engine” light as well as diagnose any other issues with your car.
Request to have the “Check Engine” light reset next time you’re getting an oil change. This is normally a free service when you are receiving an oil change.

Nowadays, more and more obd2 code scanner tool updated and added more technology, like this Bluetooth ELM327 CAN BUS scanner. I would recommend this obd2 code scanner tool, because of its Bluetooth version and could support almost all OBD-II protocols.



Want more information for the further understanding of ELM 327? Xcardiag.com offers you several free download files as following.

How to use elm327

Elm327 English manual

Bluetooth elm327 obd2

What is Bosch EDC16 and what obd2 tool is for EDC16

Firstly, you will be made familiar with the EDC16 engine management system. The new Electronic Diesel Control EDC16 engine management system from Bosch has its debut in the V10-TDI- and R5-TDI-engines. The increasing demands on diesel engines due partly to its comfort, fuel consumption, exhaust emissions and road handling, as well as the greater complexity in the hardware and software of engine management systems.

Bosch EDC16 engine management system is designed to be compatible as both a single and double control unit concept. The actual concept used depends on the number of cylinders in the engine.

BDM 100 Programmer is a universal reader that allows the user to read and program files in the ECU. After the security entries for the OBD2 programming get more and more difficult, a new possibility has come up for chip tuning of ECUs with Motorola MPC555 – 565.

Currently EDC16 ECU is successfully tested at the BDM100. If you are going to connect the ECU with BDM100, the BDM100 ECD16 OBD Probe is needed. BDM100 frame is obd2 repair ECU chip tuning tool, work for standard Bosch EDC16 engine control units. And this BDM100 Bosch Probe is compatible with CMD BDM, Optican Dual BDM and Dimsport Pro555.



If you are interested in the BDM100 EDC16 OBD NO.101 Bosch probe, please feel free to visit Xcardiag.com.

Car doesn’t talk, but we can read them via VA CAN scanner.

Sometimes I just feel something odd with my VW golf. When driving the car up the ramp, there is kind of the serious problem that the car will pause a little while then drive up a little highly, then pause and up, pause and up. What is wrong exactly? At some point, if there is kind of the handheld tool, it just told us what the problem was. It would be easier to figure out what was wrong with our car. And grant a great convenience to contact our dealer and report them what kind of situation is it.

Isn’t it a great idea? If there is a VA diagnostic tool can read the car for me, tell me what is wrong with it. Guess what? Actually there is a car diagnostic tool which can read car codes. We can say that, the car code is the language of the car.



I searched online, there are 10,000 different diagnoses for VA car, so putting your finger on the right one can be difficult. Anyway I finally found oneVA CAN scanner, which is totally can work on my 2007 VW golf. This VAG diagnostic tool is using a direct CAN connection for diagnostics. It is friendly-using for our car owners. If something goes wrong, the code scanner can plug into your car, and will get a numeric code telling us what is amiss.

You may also want to find out one auto diagnostic tool for your car. Unfortunately there are dozens of auto diagnostic scanner for different car models. I am sorry that there is no one CAN scanner can do all the cars. This VA CAN scanner I found is fully compatible with all VW, Audi, Seat and Skoda models up to the current model year.

Transponder Chip for VW ID48 VW ID T5

Volkswagen began offering the switchblade key in the late 1990s. The switchblade key has an anti-theft chip, as the transponder chip as we know, you must program to your specific VW to help reduce theft. If you have an auto key programmer, you can program your transponder yourself.

These are the two kind of transponder chip for different VW ID.
ID T5 Transponder Chip
VW ID48 Glass Chip 
 
ID T5 transponder chip supports more car models, such as Citroen, Nissan, Honda, FIAT Buick, VAG and Audi. Here are the details about compatible vehicle of ID T5 transponder chip.
RW2/RW3/U5/MII
ID: ID T5
883 ID:
SOKYMAT
SILCA: T5 (CLONEABLE)
KEYLINE: TK5 (0000)

Xcardiag.com is also professional at other car model key chip.
ID44 transponder chip: 
Benz, VW, BMW, BMW MINI
ID46 transponder chip:
Peugeot, Citroen, Renault, Suzuki, Mitsubishi, Chrysler, Nissan, Infiniti, Hyundai, GM
ID40 transponder chip:
Opel
ID42 transponder chip:
JETTA

If you are looking for one suitable transponder chip for your car key, please visit this link: http://www.xcardiag.com/search/?q=transponder+chip

CIC emulator the obd2 tool for BMW after 2008

The new generation of infotainment is created on a completely new platform, CIC (Car Infotainment Computer) and it is a hard-disk based system, replacing the slower DVD-based units. BMW from 2008 introduced new car HD multimedia named CIC to replace old one after replacing the Car Information Computer (CIC) But with the new system coming to the market, existing owners weren’t left with many options. BMW does not offer a retrofit kit nor helps with the installation, so this market was left to open to third-party companies and enthusiasts to retrofit their BMWs. So BMW CIC emulator for CIC retrofit is created, which enable Navigation and TV free modification emulator.



After replacing the CIC, the following functions are inoperative:

Navigation System

Voice Recognition System

Requirement of using BMW CIC emulator
You will need soldering iron and some electric skills.
Enabling Codes (FSC) Required After CIC Replacement
If, during the course of diagnosis, a CIC needs to be replaced, the only part that should be installed is a new part that has not been previously installed in a vehicle.


Note: The CIC enabling codes are VIN-specific and if installed in another vehicle, the Navigation System and the Voice Recognition System (SVS) will not function. Do not swap parts from donor vehicles. And the enabling codes that are downloaded via ASAP are in a compressed file format.

In the EPC (Electronic Parts Catalog), always order the three enabling codes together with a replacement CIC.

CIC Navigation Enabler Release Code (to activate Release Code functionality)

CIC Navigation Application Release Code (to activate the navigation function)

CIC Voice Repair Release Code (to activate voice control SA620)

For more BMW CIC emulator download installation instruction, please feel free to visitXcardiag.com. We will show you more information about how to added emulator installation inside CIC unit.

FGTech Galletto 2-Master EOBD2 ECU chip tuning Technical support and FAQ

Lots of ECU chip tuning tool are available online, but it is surprise that there is kind of the chip programmer can work with all Cars, Trucks, Traktors and bikes. It called FGTech Galletto 2-Master EOBD2. Here are the free download files about compatible vehicle of FGTech Galletto 2 Master.



Vehicle list free download

FGTech driver list car

FGTech driver list motorbike

FGTech driver list truck tractor

There is some guidance shows you how to check the version and some pictures guidance about BDM display and wiring diagram on FGTech manufacturer specifications.

I like to search about FGTech Galletto, want to know more and was looking forward to the FGTech news. Here is the most frequently ask and question of FGTech.

Q: Is the BDM function 100% working?

A: There is no information relate to BDM function in Xcardiag. But according to some user feedback, it can be used to BDM function.

Q: Does this tool support tricore Boot mode?
A: Yes, it does.

Q: Does this tool support the function WINGAL?
A: NO, our software of this tool does not support the WINGAL function.

Q: VERSION

A: Software: 2012 version; Hardware: V50

Q: UPDATE

A: Once a year by email

Q: What operating system can work with FGTech interface?

A: Windows 2000
Windows XP 32 e 64 bit
Windows Vista 32 e 64 bit
Windows 7 32 e 64 bit

Q: Language available

A: Italian, English, German, French, Spanish, Portuguese, Czech, Turkish

Q: What is the difference of this newest version FGTech Galletto2 Master compared to others FGTech Galletto2 Master?

A: Hardware and Functions,

This ECU remapping software developed with high-speed USB2 technology is the fastest and most secure, product on the market, it is easy to install and use. For more,Xcardiag.com will offer you the most professional technical support as they can.

Things you will need to make car key for BMW?

BMW key use advanced technology to start the engine and operate the power door locks. It is important to have your BMW’s replacement key correctly made and have the new microchip programmed by a professional, or the duplicate key may not work.

Things you will need to know, when planning to duplicate one BMW key
1. Determine what type of BMW key you own.
For example, BMW ID 44 Transponder Chip. It is only can work on the BMW car with the following messages.
RW2/RW3/U5/MII ID: PHILIPS 44 (T15) , PCF7935
883 ID:PH10



2. Choose one good auto key programmer can work on BMW.
It is easy to find out one perfect auto car maker to work on BMW. I could name two of them right now, BMW multi tool and BMW AK90 Key Programmer for all BMW EWS.

3. If you are going to get the whole car key change, Xcardiag.com offers kinds of BMW keys for you. Just go and visit, then search “BMW transponder key”.

How to Replace Smart Key, take Renault 3 Button Smart Key for example

Smart key enable car owners to lock and unlock doors, open the trunk and fuel filter, and raise and lower the hardtop and windows via a key fob. Take this Renault smart key 3 button for example, see the picture below, key fobs are the main remotes for the keyless entry system on your car, and these three remotes can be used to pop your locks, open your trunk or sound your panic alarm at any time.

 
Two ways to replace smart key
 Replace your smart key by contacting your vehicle dealership.
 1. You should first tow your vehicle to the car dealership.
 2. Provide the car dealership your vehicle identification number (VIN)
 3. A locksmith can make a replacement key for an older car for a few dollars. If you've lost the original key, it will be a little more expensive because the lock may have to be dissembled to match a replacement key.

 What if lost VIN number and both the original key, you’d better to replace your smart key with auto key programmer by yourself. All you need to do is to get one car key programmer and one smart key of your car make.

 Kinds of universal key programmer you could find out at Xcardiag.com, which can support the most car models and also read VIN number, as well as easy-controlled. It is important to look for the smart key which is match to your car too. Thanks for technological progress, even though the tiny thing as smart key shell, you could also find out the perfect one for your car. For instance, Renault 3 button smart key, there is the appropriate key shell for Renault 3 button smart key.

Save money at making car key for Suzuki

Technology these days means computer chips in car keys so that vehicles are much harder to steal. With the technical process, it cost us much more to make car key. Recently, one of my friend complain that a Suzuki dealership charge him 3 times as to program a key yourself. I lost my car last week, I just bought one Suzuki ID4D(65) transponder chip to make the new key, and paid couples of drinks for the people who help me. Let me show you how I did it.

 I google and wanted to find out one transponder key for my Suzuki online. There are lots of message about transponder key. Transponder keys that are already programmed have the code to your specific vehicle coded inside the keys. Finally, I found Suzuki ID4D(65) transponder chip at Xcardiag.com, the one match with my car transponder type. And just came to me, that I could get one key shell for this transponder chip from my friends. So I ordered it without any hesitate.

 Then I started to look for the auto car key programmer, which can copy car key. I don’t know we can programme car key by ourselves even though we lost all our car keys before, until I search for car key programmer information. It means, no need to worry about car key problem, we can fix it ourselves in somehow.

 I tried post thread at the local car repair forum, and asked for help. And one nice guy named Allan replied, and said he has a car key programmer can work on Suzuki. It is SBB Key Programmer V33, a portable unit for programming keys in immobilizer units on vehicles. Allan could lend me the car key maker. So we meet next afternoon at central park. Allan is a car fever, who likes to fix car problem himself, and do car diagnose regularly. We talked a lot, and I learnt a lot.

Two Best Auto Key Programmer Cheap and Can Do the Most Car Models

It is hard to find out one good car key programmer that is suitable for your car. Because there will be kinds of key makers for different kinds of car models. It's convenient to get one car key programmer in advanced so that you can have spares in case you lose the original key. Here are two best auto key programmers which can do the most vehicles. It is the conclusion I had after I spend the whole week on looking for the car key maker for my GM.

  SBB Key Programmer SBB Key Programmer is a new device used as a portable unit for programming keys in immobilizer units on vehicles. And now the newest version is V33, which add more support vehicles. Due to its integrated hardware, SBB V33 needs no more than an OBDII cable providing with a wide range of functions.

  T300 key programmer Spanish V9.99 T300 key programmer Spanish version V9.99 universal key programmer especial for customer need Spanish language needed.
Cover car model including Acura, Audi, Alfa, Chevrolet, Citroen, Daewoo, Ford Japan, Ford USA, Fiat, GM, GM Holden, Honda, Hyundai, Isuzu, Infiniti, Jaguar, Kia, Land Rover, Lancia, Lexus, Lincoln, Mazda Japan, Mazda USA, Mercury, Mitsubishi, Nissan, Peugeot, Renault, Rover, Seat, Skoda, Suzuki, Toyota Japan, Toyota USA ,Volkswagen and VW/Audi (Pin code reading).

 The car key programmer tool has to match the blade design and transponder signal to be able for starting the car. Xcardiag.com provided any other professional car key makers which were specialized on the specific car model.

What key programmer can programme the transponder key? AD900

A transponder key, is a type of car key, by basic definition is a device that transmits or accepts data from another device. By attaching a transponder to a device, you're determining that at some point you'll need to find that device. The transponder key either receives or emits a predetermined frequency that is only recognized by the device that is supposed to recognize it.

 If you lose your keys, it's important to get a new set from your dealer or a locksmith soon after you lose them, and reprogramme it as soon as possible.

 Then how to program a transponder key? Here is the instruction.
 1. You will first need to purchase a transponder chip key.
 2. Next you will need to have the transponder key cut like the original.
 3. Now it is time to program the new key. You will need both of the programmed keys that came with the vehicle. If you have both keys, put one of the already programmed keys into the ignition. Turn the ignition to RUN but do not start the engine. After the security light on the dash goes out, remove the key. Put the next already programmed key into the ignition and turn the key to RUN, but do not start the engine. Wait until the light on the dash goes out. Remove the key.

 If you do not have both of the programmed keys that came with the vehicle, you absolutely need one AD900 Pro Key Programmer. Ths AD900 with 4D copier, is kind of the universal key programmer can read out and has detail explanation for transponders, can program the eeprom of ECU and programming key.

 Founctions:
 1. 4D pincode explanation function.
 2. Support on copying these transponder: 13,33,T5,40,41,42,44,45 and 4C.
 3. Can write and unlock for the special transponders: change the pincode for Kia and Hyundai, unlock the ID 48 Transponder, ID 33 for Renault, ID 46 for Renault, ID 41 for Nissan and ID 42 for VW.
 4. Can use to program the EEPROM on the ECU.
 5. With the Hitag 2 function.

 Today, vehicles around the world are equipped with a number of technologies that are offered for safety and convenience. Kinds of auto key programmers that were new updated in very short time, and also support more and more car models. We should take advantages of these to protect our cars. Xcardiag.com offers most kinds of car key maker, transponder Key programmer and key copier machine wholesale.

ZED-Bull V502 Transponder key programmer VS AD900 Pro, what is new of ZED Bull?

Zed-BULL is a friendly automotive transponder clone key tool. It has been developed for all range of automotive locksmiths from beginners to advance. It is ease in use, technical support and unique properties makes it a powerful device in the market.

   What is new of ZEDBULL？

 1. New Software version: V508
    New Hardware version: V5.02
    Language: English, Turkish, Italian, Spanish, Portuguese
 2. No Tokens needed nor login card needed anymore.
 3. Support 8C and 8E chips distinguish function

 Compared to AD900 Pro, ZED-Bull added more functions in these features as following.
 1. Transponder/Reading/Identifying
 2. Transponder Cloning
 3. Transponder Production
 4. Database
 5. Update
 6. Key Pad
 7. Pin Code
 8. EEPROM Applications
 9. PC Software

  ZED-Bull ZEDBULL V502 is obd2 repair multi-language transponder cloning device. Zed Bull obd2 Key can find PIN Code, preparing processed transponders and programming transponders. Device is supported with PC software, which you can find useful information about transponders and matching car models and remote programming procedures. Storing unlimited (limited with Pc hard driver capacity) customer information to database is another advantage of ZED BULL PC Software.